Reverse Osmosis Systems
We are able to supply a complete range of Reverse Osmosis (RO) systems to suit every application from 250 gallons per day (gpd) to 40,000 gpd.

We source our equipment from several premium suppliers to ensure you get the best equipment possible for your specific application.

LIGHT DUTY COMMERCIAL SYSTEMS                                                                                        

RSX Lite - 250GPD System
The latest addition to its RSX family of light commercial reverse osmosis systems. The RSX Lite requires no power source, as there is no booster pump required. Rated at 250 GPD, each unit comes complete with twin 20" pre-filters and three BlackMax 100 GPD TFC membrane elements. Perfect for light duty applications such as water vending machines, restaurants, coffee stations or larger homes, where feed water TDS is below 800 ppm. Standard equipment includes a sturdy, powder coated steel frame with adjustable feet, push on fittings throughout and line and pre-filter pressure gauges.

Merlin 720GPD Reverse Osmosis
The Merlin series of RO systems makes up to 720 gpd of purified water per day. The RO unit can operate in a high efficiency mode with a 1:1 ratio (Maximum TDS of 500) and with a 3:1 ratio (Maximum TDS of 2000).

NM-1200 1200GPD Reverse Osmosis
The NM-1200 RO unit is a 1200gpd powerhouse. It makes tons of water and all with no motor. The all aluminum frame and stainless steel pressure vessel make the unit tough and very appealing to the eye. The waste needle valve allows for manual fast flushing as well as allowing the RO to run in high efficiency mode with a 1:1 ratio (Maximum TDS of 500) and with a 3:1 ratio (Maximum TDS of 2000).

LE 350 - 700 - 1050GPD Systems (Single Stage Pumps)
These LE (Low Energy) RO systems combine energy-saving low operating pressures and simplicity in a light commercial package. These units have a recovery ratio up to 60%! The LE line is fully assembled and offers exceptional value and performance with a compact profile. Machines are available in 350, 700 or 1050 US GPM sizes. Standard equipment includes low pressure shut-off, feed water solenoid, stainless membrane housings, dual pre-filtration housings, quality HydroPure rotary vane pumps and low energy, high performance Black Max® membranes. Options include auto-flush, permeate and waste flow meters and TDS monitors.
 

* rating @ 150 psi system pressure, feed water @ 300 TDS, 25ºC, 60% recovery, line pressure @ 60 psi

HEAVY DUTY - COMMERCIAL SYSTEMS (Multi-Stage Pumps)                         

 (Ultra Low Energy) Series

Introducing the ULE (Ultra Low Energy) series of commercial RO systems, now available from 2400 to 9600 GPD - featuring ultra-low pressure high-rejection membrane elements (100 psi) and the highest energy efficiency available in the industry. Power savings up to 54% over standard pressure (225 psi) RO systems! Recovery ratio of up to 60%!

Standard features include:

HEAVY DUTY - COMPUTER CONTROLLED SYSTEMS                                         

RO- 4000  (4,000 GPD Reverse Osmosis)

Technical Specifications:

· Two Membrane & Housings @ 4” X 40” TFC HF (ULP)
· Three 20” Big Gray Pre-Filters @ 5 Micron, 1 Micron, Sediment & Carbon Block
· One 1 HP Electric Motor and Pump 110 / 220 Volt
· Two Flow Meters @ 1: Product 1: Concentrate
· One Electronic Solenoid Valve, with Manual Override
· One Low Pressure Switch
· Four Pressure Gauges @ 2: 0-300 PSI & 2: 0-160 PSI
· One Conductivity Meter
· One Computer Control, Minitrol
· Mounted on an Epoxy Powder Coated Aluminum Frame
· Optional Anti-Scaling Device
· Optional Auto-Flush
· Optional Stainless Steel Housings (pictured)
· Additional charges may apply for 50Hz

RO- 5000  (5,000 GPD Reverse Osmosis)

Technical Specifications:

· Three Membrane & Housings@ 4” X 40” TFC HF (ULP)
· Three 20” Big Gray Pre-Filters @ 5 Micron, 1 Micron, Sediment & Carbon Block
· One 1 1/2 HP Electric Motor and Pump 110 / 220 Volt
· Two Flow Meters @ 1: Product 1: Concentrate
· One Electronic Solenoid Valve, with Manual Override
· One Low Pressure Switch
· Four Pressure Gauges @ 2: 0-300 PSI & 2: 0-160 PSI
· One Conductivity Meter
· One Computer Control, Minitrol
· Mounted on an Epoxy Powder Coated Aluminum Frame
· Optional Anti-Scaling Device
· Optional Auto-Flush
· Additional charges may apply for 50Hz

RO- 7000  (7,000 GPD Reverse Osmosis)

Technical Specifications:

· Four Membrane & Housings @ 4” X 40” TFC HF (ULP)
· Three 20” Big Gray Pre-Filters @ 5 Micron, 1 Micron, Sediment & Carbon Block
· One 1 1/2 HP Electric Motor and Pump 110 / 220 Volt
· Two Flow Meters @ 1: Product 1: Concentrate
· One Electronic Solenoid Valve, with Manual Override
· One Low Pressure Switch
· Four Pressure Gauges @ 2: 0-300 PSI & 2: 0-160 PSI
· One Conductivity Meter
· One Computer Control, Minitrol
· Mounted on an Epoxy Powder Coated Aluminum Frame
· Optional Anti-Scaling Device
· Optional Auto-Flush
· Additional charges may apply for 50Hz

HEAVY DUTY - COMPUTER CONTROLLED SYSTEMS                                                                          

RO- 10000  (10,000 GPD Reverse Osmosis) 

Technical Specifications:

· Six Membrane & Housings @ 4” X 40” TFC HF (ULP)
· Two 20” Big Gray Pre-Filters @ 5 Micron, Sediment & Carbon Block
· One 18” FSI Bag Filter 10 Microns
· One 1 1/2 HP* Electric Motor Stainless Steel Pump
· Two Flow Meters @ 1: Product 1: Concentrate
· One Low Pressure Switch
· Four Pressure Gauges @ 2: 0-300 PSI 2: 0-160 PSI
· One Computer Control, Low Pressure Cut Off Switch with Conductivity Meter
  (TDS), Rotrol S150
· One Anti-Scaling Device 1” NPT
· Four Swivel Wheels with Brakes
· Mounted on an Epoxy Powder Coated Aluminum Frame
· Optional Anti-Scaling Device
· Optional Auto-Flush, 3 Phase
· Additional charges may apply for 50Hz
· 3 HP Motor Used For Overseas

RO- 20000  (20,000 GPD Reverse Osmosis)

Technical Specifications:

· Ten Membranes & Housings @ 4” x 40” TFC HF (ULP)
· Two 20” Big Gray Pre-Filters @ 5 Microns, Sediment & Carbon Block
· One 18” FSI Bag Filter 10 Micron
· One 5 HP Electric Motor all Stainless Steel Pump 160-220 PSI
· Two Flow Meters @ 1: Product 1: Concentrate
· One Electric Solenoid Valve 110 / 220 Volt with Manual Override
· One Low Pressure Switch
· Four Pressure Gauges 2: 0-300 PSI 2: 0-160 PSI
· One Computer Control with Conductivity Meter (TDS), Rotrol 1
· One Anti-Scaling Device 1 1/4” NPT
· Four Swivel Wheels with Brakes
· Mounted on a Epoxy Powder Coated Aluminum Frame
· Auto-Flush, 3 Phase
· Optional Stainless Steel Housings (pictured)
· Additional charges may apply for 50Hz

RO- 30000  (30,000 GPD Reverse Osmosis)

Technical Specifications:

· Twenty Membranes @ 4” X 40” TFC HF (ULP)
· Ten Membrane Housings (Double) 4” X 80”
· One Bag Filter (Hayward) 10 Micron
· One 5-7 HP Electric Motor Stainless Steel Pump 160-220 PSI
· Two Flow Meters @ 1: Product 1: Concentrate
· One Electric Solenoid Valve 110 / 220 Volt with Manual Override
· One Low Pressure Switch
· One Chemical Injection Feed System 30 Gallons
· Four Pressure Gauge 2: 0-300 PSI 2: 0-160 PSI
· One Computer Control with Conductivity Meter (TDS), Rotrol 1
· One Anti-Scaling Device 1 1/4” NPT
· Four Swivel Wheels with Brakes
· Mounted on an Epoxy Powder Coated Aluminum Frame
· Optional Auto-Flush
· Additional charges may apply for 50Hz

RO- 40000  (40,000 GPD Reverse Osmosis)

Technical Specifications:

· Twenty-four Membranes @ 4” X 40” TFC HF (ULP)
· Twelve Membrane Housings (Double) 4” X 80”
· One Bag Filter (Hayward) 10 Micron
· One 5-7 HP Electric Motor all Stainless Steel Pump 160-220 PSI
· Two Flow Meters @ 1: Product 1: Concentrate
· One Electric Solenoid Valve 110 / 220 Volt with Manual Override
· One Low Pressure Switch
· Dual Chemical Injection Feed System 30 Gallons
· Four Pressure Gauge 2: 0-300 PSI 2: 0-160 PSI
· One Computer Control with Conductivity Meter (TDS), Rotrol 1
· One Anti-Scaling Device 1 1/4” NPT
· Four Swivel Wheels with Brakes
· Mounted on an Epoxy Powder Coated Aluminum Frame
· Optional Auto-Flush
· Additional charges may apply for 50Hz

   ** Some systems may not look exactly the same.